Lancer LS L4-2.0L SOHC (2002)
1. Insert a flat-tipped screwdriver into the rear end of the tapping screw cap on the door inside handle cover, and prize out the cap to the direction
shown. Then remove the tapping screw.
2. Insert special tool MB990784 into the clearance between the door inside handle cover and the door inside handle, and disengage the claws of the
door inside handle.
3. Insert special tool MB990784 into the rear end of the inside handle cover, and prize out the cover to the direction shown. Then remove the door
inside handle cover.
<<B>> CLIP REMOVAL
Use cloth to remove the clip as shown in the illustration.
INSTALLATION SERVICE POINTS
>>A<< WATERPROOF FILM INSTALLATION
