Lancer LS L4-2.0L SOHC (2002)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
REMOVAL AND INSTALLATION
NOTE: The ABS-ECU is integrated in the hydraulic unit.
REMOVAL SERVICE POINTS
<<A>> HARNESS CONNECTOR DISCONNECTION
Move the lock lever of the ABS-ECU connector as shown in the illustration, and then disconnect the harness connector.
<<B>> HYDRAULIC UNIT AND ABS-ECU REMOVAL
WARNING: The hydraulic unit is heavy. Use care when removing it.
CAUTION:
-
The hydraulic unit cannot be disassembled. Never loosen its nuts or bolts.
