Lancer LS L4-2.0L SOHC (2002)
3. Using the letter symbols in the table, install the upper oil pan using the correct bolt. Refer to the table for proper torque.
>>B<<LOWER OIL PAN INSTALLATION
1. With scraper or wire brush, etc., remove residual gasket sealant from the attached on lower oil pan.
2. Apply sealant on the mounting surface of lower oil pan without any gap as indicated in the figure, and install lower oil pan to the upper oil pan.
Specified sealant: MITSUBISHI GENUINE PART MD970389 or equivalent
3. According to the sequence specified in the figure, tighten mounting bolts of lower oil pan to the specified torque.
>>C<< DRAIN PLUG GASKET INSTALLATION
Gasket should be replaced with a new one, and install it in the direction specified in the figure.