Lancer LS L4-2.0L SOHC (2002)
3. Using special tool MB991653, tighten the bolts by the following procedure.
>>C<< CAMSHAFT SPROCKET INSTALLATION
Use special tools MD998719 and MB990767 in the same way as during removal to install the camshaft sprocket.
>>D<< O-RING/HIGH-PRESSURE FUEL HOSE INSTALLATION
CAUTION: Do not allow engine oil to enter the fuel rail.
1. Apply a small amount of new engine oil to the O-ring.
2. While turning the high-pressure fuel hose to the right and left, slide it into the fuel rail. Be careful not to damage the O-ring. After installing,
check that the hose turns smoothly.
3. If the hose does not turn smoothly, the O-ring is probably binding. Disconnect the high-pressure fuel hose and check the O-ring for damage.
4. Re-insert the fuel rail and confirm the hose turns smoothly.
