Lancer LS L4-2.0L SOHC (2002)
Timing Belt: Adjustments
TIMING BELT TENSION ADJUSTMENT
1. Remove the timing belt upper cover.
2. Turn the crankshaft clockwise to set the No. 1 cylinder to the top dead compression center.
CAUTION: As the purpose of this procedure is to apply the proper amount of tension to the timing belt by means of the cam drive torque, be
sure not to rotate the crankshaft counterclockwise.
3. Remove the access cover.
4. Loosen the timing belt tensioner fixing bolt to apply tension to the belt by means of the force of the tensioner spring.
CAUTION: Loosen the bolt 1/4 to 1/2 turn. If the belt is loosened more than necessary, the bolt may fall inside the cover.
5. Tighten the timing belt tensioner fixing bolt.
6. Install the access cover.
7. Install the timing belt upper cover.
