Lancer LS L4-2.0L SOHC (2002)
-
Do not attempt to repair the wiring harness connectors of the SRS. If any of the connectors are diagnosed as faulty, replace the wiring harness. If
the wires are diagnosed as faulty, replace or repair the wiring harness according to the following table.
WARNING:
-
Inspection of the SRS-ECU connector harness should be carded out by the following procedure. Insert the backprobing tool into
connector from harness side (rear side), and connect the tester to backprobing tool. If any tool other than backprobing tool is used, it may