Lancer LS L4-2.0L SOHC (2002)
Driver/Vehicle Information Display: Testing and Inspection
Diagnosis
DIAGNOSIS / MULTI-CENTER DISPLAY
This system is controlled by the Simplified Wiring System (SWS). For troubleshooting, refer to SWS Diagnosis.
The following tests can be performed using the SWS Simplified Fault Diagnosis Mode:
-
SWS ECU specification
-
Switch input signals for each ECU
-
Diagnostic trouble code output
Refer to Computers and Control Systems/Information Bus/Testing for details of the SWS Simplified Fault Diagnosis Mode.
Refer to: See: Powertrain Management/Computers and Control Systems/Information Bus
