Lancer LS L4-2.0L SOHC (2002)
1. Loosen the nut of the generator pivot bolt.
2. Loosen the lock bolt.
Standard Value
3. Turn the adjusting bolt to adjust the belt vibration frequency, belt tension or deflection to the standard value.
CAUTION: Check after turning the crankshaft one or more rotations clockwise.
4. Tighten the lock bolt.
Tightening torque: 23 ± 2 N.m (16 ± 2 ft-lb)
5. Tighten the nut of the generator pivot bolt.
Tightening torque: 44 ± 10 N.m (33 ± 7 ft-lb)
6. Tighten the adjusting bolt.
Tightening torque: 5.0 ± 1.0 N.m (44 ± 8 in-lb)
Power Steering Oil Pump and A/C Compressor Drive Belt Tension Check and Adjustment
Check the drive belt tension by the following procedure.
<When using scan tool MB991502>
Required Special Tools:
-
MB991502: Scan Tool (MUT-II)
