Lancer LS L4-2.0L SOHC (2002)
STEP 6. Check ETACS-ECU connector C-228 and data link connector C-14 for damage.
Q: Are ETACS-ECU connector C-228 and data link connector C-14 in good condition?
YES: Go to STEP 7.
NO: Repair or replace the connector. Refer to Harness Connector Inspection.The system should communicate with the SWS monitor kit normally.
STEP 7. Check the wiring harness between ETACS-ECU connector C-228 and data link connector C-14.
NOTE: Also check joint connector C-101. If joint connector C-101 is damaged, repair or replace the connector as described in Harness Connector
Inspection.
Q: Is the wiring harness between ETACS-ECU connector C-228 and data link connector C-14 in good condition?
YES: Replace the ETACS-ECU. The system should communicate with the SWS monitor kit normally.
NO: Repair the wiring harness. The system should communicate with the SWS monitor kit normally.
