mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2399 > < Initial Inspection and Diagnostic Overview|Page 2397
Page 46
background image

-

MB991223: Test Harness Set

STEP 1. Check which door lock is defective.

Q: Which of the door locks is defective?

Driver's door : Go to Step 2.
Front passenger's door : Go to Step 5.
Rear door (LH): Go to Step 8.
Rear door (RH): Go to Step 11.

STEP 2. Check the driver's door lock actuator.

Remove the driver's door lock actuator, and check it. Refer to Door Handle and Latch.

Q: Does the driver's door lock actuator work normally? 

YES: Go to Step 3.

NO: Replace the driver's door lock actuator. Check that all the doors can be locked and unlocked normally.

Initial Inspection and Diagnostic Overview|Page 2399 > < Initial Inspection and Diagnostic Overview|Page 2397