Lancer LS L4-2.0L SOHC (2002)
STEP 4. Check the wiring harness from ETACS-ECU connectors C-226 and C-227 to driver's door lock actuator connector E-04.
NOTE: Also check junction block connector C-214 and intermediate connector C-17. If junction block connector C-214 or intermediate connector C-17
is damaged, repair or replace the connector as described in Harness Connector Inspection.
Q: Is the wiring harness from ETACS-ECU connectors C-226 and C-227 to driver's door lock actuator connector E-04 in good condition?
YES: Replace the ETACS-ECU. Check that all the doors can be locked and unlocked normally.
NO: Repair the wiring harness. Check that all the doors can be locked and unlocked normally.
STEP 5. Check the front passenger's door lock actuator.
Remove the passenger's door lock actuator, and check it.
Refer to Door Handle and Latch.
Q: Is the front passenger's seat door lock actuator normal?
YES: Go to Step 6.
NO: Replace the front passenger's seat door lock actuator.
Check that all the doors can be locked and unlocked normally.
