Lancer LS L4-2.0L SOHC (2002)
STEP 16. Check the wiring harness between front power window sub-switch (RH) connector E-14 and front power window motor (RH)
connector E-11.
Q: Is the wiring harness between front power window main switch (RH) connector E-14 and front power window motor (RH) connector E-11 in good
condition?
YES: No action to be taken.
NO: Repair the wiring harness. When the front power window sub-switch (RH) is operated, the front power window (RH) should open or close
normally.
STEP 17. Check the rear power window sub-switch (LH) for continuity.
1. Remove the rear power window sub-switch (LH). Refer to Door-Door Trim and Waterproof Film.
2. Check continuity when the rear power window sub-switch (LH) is operated to "UP" or "DOWN" position.
Q: Is the rear power window sub-switch (LH) normal?
YES: Go to Step 18.
NO: Replace the rear power window sub-switch (LH). When the rear power window sub-switch (LH) is operated, the rear power window (LH)
should open or close normally.
