Lancer LS L4-2.0L SOHC (2002)
STEP 29. Check the wiring harness between rear power window sub-switch (LH) connector E-08 and rear power window motor (LH)
connector E-09.
Q: Is the wiring harness between rear power window main switch (LH) connector E-08 and rear power window motor (LH) connector E-09 in good
condition?
YES: No action to be taken.
NO: Repair the wiring harness. When the rear power window sub-switch (LH) is operated, the rear power window (LH) should open or close
normally.
STEP 30. Check the rear power window sub-switch (RH) for continuity.
1. Remove the rear power window sub-switch (RH). Refer to Door-Door Trim and Waterproof Film.
2. Check continuity when the rear power window sub-switch (RH) is operated to "UP" or "DOWN" position.
Q: Is the rear power window sub-switch (RH) normal?
YES: Go to Step 31.
NO: Replace the rear power window sub-switch (RH). When the rear power window sub-switch (RH) is operated, the rear power window
(RH) should open or close normally.