Lancer LS L4-2.0L SOHC (2002)
STEP 9. Check the wiring harness between front-ECU connector A-11X and the ignition switch (IG2).
NOTE: Also check intermediate connector C-129, junction block connectors C-210 and C-211 and joint connector C-101.
If intermediate connector C-129, junction block connector C-210 or C-211 or joint connector C-101 is damaged, repair or replace the connector as
described in Harness Connector Inspection.
Q: Is the wiring harness between front-ECU connector A-11X and the ignition switch (IG2) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Check that the windshield wiper works normally.
Inspection Procedure F-2
Windshield Wiper and Washer: The Windshield Wipers do not Work When the Windshield Wiper Switch is at "INT" or "MIST" Position or
the Windshield Washer Switch is at "ON" Position. However, the Wipers Work at Low Speed when the Windshield Wiper Switch is at "LO"
or "HI."
