mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2495 > < Initial Inspection and Diagnostic Overview|Page 2493
Page 142
background image

STEP 9. Check the wiring harness between windshield washer motor connector A-22 and front-ECU connector A-11X.

NOTE:  Also check intermediate connectors C-129 and C-111. If intermediate connectors C-111 or C-129 is damaged, repair or replace the connector as
described in Harness Connector Inspection.

Q: Is the wiring harness between windshield washer motor connector A-22 and front-ECU connector A-11X in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. Check that the windshield washer works normally.

Inspection Procedure G-1

Rear Wiper and Washer: Rear Wiper does no not Work at All

Initial Inspection and Diagnostic Overview|Page 2495 > < Initial Inspection and Diagnostic Overview|Page 2493