Lancer LS L4-2.0L SOHC (2002)
STEP 4. Check the front-ECU connector A-10X for damage.
Q: Is the front-ECU connector A-10X in good condition?
YES: Go to Step 5.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the tail lights illuminate normally.
STEP 5. Check the wiring harness between front-ECU connector A-10X and the battery.
Q: Is the wiring harness between front-ECU connector A-10X and the battery in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Check that the tail lights illuminate normally.
Inspection Procedure I-2
Headlight, Tail Light: Headlights (Low-beam) do not Illuminate Normally
