Lancer LS L4-2.0L SOHC (2002)
STEP 9. Check the wiring harness between position light (LH) connector A-14 and ground.
Q: Is the wiring harness between position light (LH) connector A-14 and ground in good condition?
YES: Replace the position light socket (LH). Check that the position light (LH) illuminates normally.
NO: Repair the wiring harness. Check that the position light (LH) illuminates normally.
STEP 10. Check position light (LH) connector A-14 and front-ECU connector A-10X for damage.
Q: Are position light (LH) connector A-14 and front-ECU connector A-10X in good condition?
YES: Go to Step 11.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the position light (LH) illuminates normally. Check that the
position light (LH) illuminates normally.