Lancer LS L4-2.0L SOHC (2002)
STEP 43. Check license plate light (RH) connector F-10 for damage.
Q: Is license plate light (RH) connector F-10 in good condition?
YES: Go to Step 44.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the license plate lights (RH) illuminate normally.
STEP 44. Check the wiring harness between license plate light (RH) connector F-10 and ground.
NOTE: Also check intermediate connector F-12. If intermediate connector F-12 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between license plate light (RH) connector F-10 and ground in good condition?
YES: Replace the license plate light socket. Check that the license plate light (RH) illuminates normally.
NO: Repair the wiring harness. Check that the tail light (RH) illuminates normally.