Lancer LS L4-2.0L SOHC (2002)
STEP 8. Check front turn-signal light (LH) connector A-16 for damage.
Q: Is the front turn-signal (LH) connector A-16 in good condition?
YES: Go to Step 9.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the turn-signal lights illuminate normally.
STEP 9. Check the wiring harness between front turn-signal light (LH) connector A-16 and ground.
Q: Is the wiring harness between front turn-signal light (LH) connector A-16 and ground in good condition?
YES: Replace the socket. Check that the turn-signal lights illuminate normally.
NO: Repair the wiring harness. Check that the turn-signal lights illuminate normally.
