Lancer LS L4-2.0L SOHC (2002)
STEP 21. Check the wiring harness between side turn-signal light (LH) connector A-02 and ground.
Q: Is the wiring harness between side turn-signal light (LH) connector A-02 and ground in good condition?
YES: Replace the socket. Check that the turn-signal lights illuminate normally.
NO: Repair the wiring harness. Check that the turn-signal lights illuminate normally.
STEP 22. Check side turn-signal light (LH) connector A-02 and ETACS-ECU connector C-226 for damage.
Q: Are side turn-signal light (LH) connector A-02 and ETACS-ECU connector C-226 in good condition?
YES: Go to Step 23.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the turn-signal lights illuminate normally.
