mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2597 > < Initial Inspection and Diagnostic Overview|Page 2595
Page 244
background image

YES: Go to Step 34.

NO: Go to Step 32.

STEP 32. Check rear combination light (LH) connector F-14 for damage.

Q: Is rear combination light (LH) connector F-14 in good condition?

YES: Go to Step 33.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the turn-signal lights illuminate normally.

STEP 33. Check the wiring harness between rear combination light (LH) connector F-14 and ground.

Q: Is the wiring harness between rear combination light (LH) connector F-14 and ground in good condition?

YES: Replace the socket assembly Check that the turn-signal lights illuminate normally.

NO: Repair the wiring harness. Check that the turn-signal lights illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2597 > < Initial Inspection and Diagnostic Overview|Page 2595