Lancer LS L4-2.0L SOHC (2002)
STEP 39. Check the wiring harness between rear combination light (RH) connector F-08 and ground.
Q: Is the wiring harness between rear combination light (RH) connector F-08 and ground in good condition?
YES: Replace the socket assembly. Check that the turn-signal lights illuminate normally.
NO: Repair the wiring harness. Check that the turn-signal lights illuminate normally.
STEP 40. Check rear combination light (RH) connector F-08 and ETACS-ECU connector C-226 for damage.
Q: Are rear combination light (RH) connector F-08 and ETACS-ECU connector C-226 in good condition?
YES: Go to Step 41.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the turn-signal lights illuminate normally.
