Lancer LS L4-2.0L SOHC (2002)
STEP 17. Check the wiring harness between luggage compartment light connector F-02 and ETACS-ECU connector C-226.
NOTE: Also check junction block connector C-217. If junction block connector C-217 is damaged, repair or replace the connector as described in
Harness Connector Inspection.
Q: Is the wiring harness between luggage compartment light connector F-02 and ETACS-ECU connector C-226 in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Check that the luggage compartment lights illuminate normally.
STEP 18. Check the luggage compartment light switch.
Disconnect luggage compartment light switch connector F-09.
Then check the continuity between the switch and ground.
Q: Is the luggage compartment light switch in good condition?
YES: Go to Step 19.
NO: Replace the luggage compartment light switch. Check that the luggage compartment lights illuminate normally.