Lancer LS L4-2.0L SOHC (2002)
STEP 8. Check the wiring harness between combination meter connector C-02 and ETACS-ECU connector C-228.
Q: Is the wiring harness between combination meter connector C-02 and ETACS-ECU connector C-228 in good condition?
YES: Replace the ETACS-ECU. Check that the door ajar indicator light illuminates normally.
NO: Repair the wiring harness. Check that the door ajar indicator light illuminates normally.
Inspection Procedure L-1
The ETACS-ECU does not Receive Any Signal from the Ignition Switch (ACC)
Ignition Switch (ACC) Input Circuit
