Lancer LS L4-2.0L SOHC (2002)
STEP 3. Check driver's door lock actuator switch connector E-04 for damage.
Q: Is driver's door lock actuator switch connector E-04 in good condition?
YES: Go to Step 4.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the functions, which are described in "CIRCUIT OPERATION",
work normally, the input signal from the driver's door lock actuator switch should be normal.
STEP 4. Check the wiring harness between driver's door lock actuator switch connector E-04 and ground.
NOTE: Also check intermediate connector C-17. If intermediate connectors C-17 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between driver's door lock actuator switch connector E-04 and ground in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. If the functions, which are described in "CIRCUIT OPERATION", work normally, the input signal from the driver's
door lock actuator switch should be normal.
