mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

ABOUT US
Recall - Throttle Position Sensor Re-Learn for High Idle|Page 2951 > < Recall - Throttle Position Sensor Re-Learn for High Idle|Page 2949

Lancer LS L4-2.0L SOHC (2002)

Page 2
background image

4. Slowly move the throttle lever from the idle position to the full-throttle position and check then if the waveform is free from any noise.
5. If any noise is recognized, replace the throttle position sensor.

NOTE:  After replacement the throttle position sensor should be adjusted.

Recall - Throttle Position Sensor Re-Learn for High Idle|Page 2951 > < Recall - Throttle Position Sensor Re-Learn for High Idle|Page 2949