Lancer LS L4-2.0L SOHC (2002)
DISASSEMBLY AND REASSEMBLY
DISASSEMBLY SERVICE POINTS
<<A>> SELF-LOCKING NUT REMOVAL
CAUTION:
^
Do not tighten the special tool bolt too tight. The special tool will be broken if the allowable tightening torque of 74 Nm (55 ft. lbs.) is exceed.
^
Install the special tools evenly, and so that the maximum length will be attained within the installation range.
^
Do not use an impact wrench to tighten the bolt of special tool MB991237, otherwise the special tool will break.
1. Use special tools MB991237 and MB991238 to compress the coil spring.
WARNING: To prevent the piston rod self-locking nut inside the strut from loosening, do not use an impact wrench when the
self-locking nut is loosened.
