Lancer LS L4-2.0L SOHC (2002)
CAUTION: with the fluid set at the proper level, A/T fluid collection should not exceed one quart or internal damage to the transaxle may occur.
1. Disconnect the OUTLET (From cooler) line at the transaxle and place a collecting container under the disconnected line.
2. Run the engine at curb idle speed with the shift selector in neutral.
3. If A/T fluid flow is intermittent or it takes more than 20 seconds to collect one quart of A/T fluid, replace the cooler.
4. If flow is found to be within acceptable limits, reconnect the cooler line. Then fill the transaxle to the proper level, using DIAMOND ATF SP III
or equivalent fluid.
