Lancer LS L4-2.0L SOHC (2002)
Use special tools MD998812, MD998813, MD998815 and MD998801 to press out ABS rotor from the rear hub assembly.
INSTALLATION SERVICE POINT
>>A<< ABS ROTOR INSTALLATION
CAUTION: When installing, take care not to deform the ABS rotor.
Press-fit the ABS rotor to the rear hub assembly.
>>B<< SELF-LOCKING NUT INSTALLATION
CAUTION: Before securely tightening the self-locking nuts, make sure there is no load on the wheel bearings. Otherwise the wheel bearing will
be damaged.
1. Using special tool MB990767, tighten the self-locking nut.
2. After tightening the self-locking nut, crimp the nut to meet the concave portion of the spindle.
INSPECTION
^
Check the oil seal of the rear hub unit bearing for crack or damage.
^
Check the rear hub unit bearing for wear or damage.
^
Check the ABS rotor for chipped teeth.