Lancer Sportback L4-2.0L (4B11) (2011)
/Page-0011.png)
q. This message will display when ECM reprogramming is successfully completed. Confirm the "S/W P/N" displayed matches "New S/W P/N" in the
table shown in this TSB.
r. You will be prompted to turn the ignition switch to the OFF position, wait at least 8 seconds, then turn it back on.
s. Click the check mark and you will be returned to the "ECU Reprogramming" page.
2. Click the Home icon at the lower left corner of the page to return to the MUT-III main page.
3. Using the MUT-III, check and erase ALL DTCs from all systems as follows.
