Lancer Sportback L4-2.4L (4B12) (2010)
/Page-1260019.png)
YES : Go to Step 7.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary.
STEP 7. Check combination meter connector C-04 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is combination meter connector C-04 in good condition?
YES : Go to Step 8.
NO : Repair or replace the damaged component. The steering remote control switch should work normally.
STEP 8. Check the wiring harness between combination meter connector C-04 (terminal 23) and clock spring connector C-205 (terminal 6).
-
Check the power supply line open circuit and short circuit.
Q: Is the wiring harness between combination meter connector C-04 (terminal 23) and clock spring connector C-205 (terminal 6) in good condition?
YES : Go to Step 9.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary.
STEP 9. Retest the system
Check whether the illumination of the steering wheel voice control switch come on normally.
Q: Doe the illumination of the steering wheel voice control switch come on normally?
YES : The trouble can be an intermittent malfunction. (Refer to How to use Troubleshooting/inspection sevice points - How to cope with
Intermittent Malfunction).
NO : Replace the steering wheel voice control switch.
Inspection Procedure 7
Inspection Procedure 7: Check the hands free module power supply circuit.
CAUTION: Before replacing the module, ensure that the power supply circuit, the ground circuit and the communication circuit are normal.
