Testing and Inspection for Steering Mounted Controls Assembly in Lancer Sportback (2010)
OK: Normal condition is displayed.
Q: Is the check result normal?
YES : Replace the radio and CD player.
NO : Go to Step 2.
STEP 2. Check the steering wheel audio remote control switch.
Remove the steering wheel audio remote control switch. Then check continuity between the switch terminals.
Q: Is the steering wheel audio remote control switch in good condition?
YES : Go to Step 3.
NO : Replace the steering wheel audio remote control switch.
STEP 3. Check clock spring connector C-204 and C-205 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Are clock spring connector C-204 and C-205 in good condition?
YES : Go to Step 4.
NO : Repair or replace the damaged component(s).
STEP 4. Check the clock spring.
Check whether the clock spring is in good condition (Refer to Driver's Air Bag Module and Clock Spring [EXCEPT RALLIART] See: Restraint
Systems/Air Bag Systems/Air Bag/Testing and Inspection/Driver's Air Bag Module and Clock Spring [GTS] or [RALLIART]).
Q: Is the check result normal?
YES : Go to Step 5.
NO : Replace the clock spring.
STEP 5. Check radio and CD player connector C-104 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is radio and CD player connector C-104 in good condition?