Lancer Sportback L4-2.4L (4B12) (2010)
/Page-1306015.png)
YES : Go to Step 6.
NO : Repair or replace the damaged component(s). Check that the input signal of key reminder switch is normal.
STEP 6. Check the wiring harness between key reminder switch connector C-213 (terminal 3) and ETACS-ECU connector C-315 (terminal 13).
Check the output lines for open circuit and short circuit.
Q: Is the wiring harness between key reminder switch connector C-213 (terminal 3) and ETACS-ECU connector C-315 (terminal 13) in good
condition?
YES : Replace the ETACS-ECU. Check that the input signal of key reminder switch is normal.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Check that the input signal of key reminder switch is normal.
Inspection Procedure 4
Inspection Procedure 4: ETACS-ECU cannot receive the signal of front door lock actuator (LH) or front door lock actuator (RH).
