Lancer Sportback L4-2.4L (4B12) (2010)
/Page-1351001.png)
Trunk / Liftgate Latch: Adjustments
ON-VEHICLE SERVICE
LIFTGATE ALIGNMENT
ADJUSTMENT OF ENGAGEMENT BETWEEN STRIKER AND LATCH
1. Replace the striker mounting screws with temporary bolts, and use the remover bar (Special tool: MB990939) and a hammer to tap the temporary
bolt to the desired direction.
2. Tighten the striker mounting screws.
Tightening torque: 20 ± 5 N.m (15 ± 3 ft-lb)
