Lancer Sportback L4-2.4L (4B12) (2010)
Parking Brake Drum: Service and Repair
Inspection
Brake Lining Thickness Check
INSPECTION
BRAKE LINING THICKNESS CHECK
1. Measure the lining thickness at the most worn area.
Standard value: 2.8 mm (0.11 inch)
Limit: 1.0 mm (0.04 inch)
2. If the thickness is less than the limit value, replace the right and left shoe and lining assemblies as a set.
Brake Drum Inside Diameter Check
INSPECTION
BRAKE DRUM INSIDE DIAMETER CHECK
1. Measure the inside diameter of the brake drum at two positions or more.
Standard value:
190.0 mm (7.48 inches) [2.0L Engine]
168.0 mm (6.61 inches) [2.4L Engine]
Limit:
191.0 mm (7.52 inches) [2.0L Engine]
169.0 mm (6.65 inches) [2.4L Engine]
2. If the inside diameter is more than limit value or if there is excessive wear, replace the brake disk.