Lancer Sportback L4-2.4L (4B12) (2010)
1. Turn the ignition switch to the "ON" position.
2. Check that the "CRUISE" indicator light within the combination meter illuminates when the "ON/OFF" switch is pressed (cruise control system:
ON.)
3. Press the "ON/OFF" switch again (cruise control system: OFF), and check that the "CRUISE" indicator light within the combination meter goes
out.
CRUISE CONTROL SETTING
1. Start the engine.
2. Press the "ON/OFF" switch (cruise control system: ON, "CRUISE" indicator light: illuminated.)
3. Drive at the desired speed, above approximately 40 km/h (25 mph.)