Lancer Sportback L4-2.4L (4B12) (2010)
Hold the hexagon part of the camshaft with a monkey wrench. Loosen the camshaft sprocket mounting bolt and remove the camshaft sprocket from the
camshaft.
[H] POWER STEERING OIL PUMP ASSEMBLY REMOVAL
1. With the hose installed, remove the power steering oil pump assembly from the bracket.
2. Tie the removed power steering oil pump assembly with a string at a position where it will not interfere with the removal and installation of oil
feed control valve.
[I] OIL FEEDER CONTROL VALVE REMOVAL
CAUTION
After removal of the oil feeder control valve, be careful to prevent dust from getting into the oil passage in the cylinder head.
INSTALLATION SERVICE POINTS
[A] O-RING/OIL FEEDER CONTROL VALVE INSTALLATION
CAUTION
When installing the oil feeder control valve, be careful to avoid damage to the O-ring.
Apply engine oil to the O-ring of the oil feeder control valve and install the oil feeder control valve to the cylinder head.
[B] CAMSHAFT/CAMSHAFT SPROCKET INSTALLATION
1. Use a monkey wrench to secure the hexagon part of the camshaft in the same manner as removal.