Lancer Sportback L4-2.4L (4B12) (2010)
/Page-312002.png)
1. Replace special tool MB992250 with a guide of special MB991355 as shown in the figure.
2. Insert special tool MB992250 in the knuckle and tighten it with a bolt and nut.
NOTE: Set the spacers of special tool MB992250 as shown in the figure.
3. Use special tools MB991000, MB991017, MB991355 and MB992250 to remove the hub.
[B] WHEEL BEARING REMOVAL
1. Use special tools MD998801 and MB991000 to remove the wheel bearing inner race (outside) from the hub.
