Lancer Sportback L4-2.4L (4B12) (2010)
/Page-572080.png)
4. Check the wiring harness between joint connector (CAN4) A-55 (terminal 6) and ECM connector B-109 (terminal 90) [RALLIART]
OK: Continuity exists (2 ohm or less)
5. Check the wiring harness between joint connector (CAN4) A-55 (terminal 19) and ECM connector B-109 (terminal 91) (RALLIART)
OK: Continuity exists (2 ohm or less)
Q: Is the wiring harness between joint connector (CAN3) C-124 [Except RALLIART] or joint connector (CAN4) A-55 [RALLIART] and ECM
connector B-109 in good condition?
YES : Check the power supply circuit of the ECM. Refer to Troubleshooting [RALLIART] See: Testing and Inspection/Symptom Related
Diagnostic Procedures/Symptom Chart or Troubleshooting [Except RALLIART]. See: Testing and Inspection/Symptom Related Diagnostic
Procedures/Symptom Chart
NO : Repair the wiring harness between joint connector (CAN3) C-124 [Except RALLIART] or joint connector (CAN4) A-55 [RALLIART] and
ECM connector B-109.
Diagnostic Item 13
