Lancer Sportback L4-2.4L (4B12) (2010)
/Page-607002.png)
1. Drill in the break-off bolt a hole deep enough for the tap to stand.
2. Remove the break-off bolt with a left-hand tap.
INSTALLATION SERVICE POINTS
]]A[[ BREAK-OFF BOLTS INSTALLATION [VEHICLES FOR CANADA]
Tighten until the head of break-off bolt is broken off.
]]B[[ INITIALIZATION OPERATION
Turn the ignition switch to the "ON" position and then to "LOCK" (OFF) position and hold it for at least 10 seconds.
