mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

ABOUT US
Manifold Pressure/Vacuum Sensor > < Procedures|Page 2592

Lancer Sportback L4-2.4L (4B12) (2010)

Page 2
background image

Set the connector of the knock sensor to the area shown in the figure, and tighten the knock sensor to the specified torque.

Tightening torque: 20 ± 2 N.m (15 ± 1 ft-lb)

Manifold Pressure/Vacuum Sensor > < Procedures|Page 2592