Lancer Sportback L4-2.4L (4B12) (2010)
Knock Sensor: Removal and Replacement
KNOCK SENSOR
REMOVAL AND INSTALLATION
[2.4L ENGINE]
CAUTION:
-
When the knock sensor replacement is performed, use scan tool MB991958 to initialize the learning value.
-
Do not drop or hit the knock sensor against other components. Internal damage may result, and the knock sensor will need to be
replaced.
Pre-removal & Post-installation Operation
Removal Steps 1-2
REMOVAL SERVICE POINT
]]A[[ THROTTLE BODY MOUNTING BOLTS REMOVAL
Remove the throttle body mounting bolts and put the throttle body aside so as not to interfere the knock sensor connector disconnection.
INSTALLATION SERVICE POINT
]]A[[ KNOCK SENSOR INSTALLATION