Lancer Sportback L4-2.4L (4B12) (2010)
Ignition Switch: Service and Repair
REMOVAL AND INSTALLATION
CAUTION
-
Before removing the steering wheel and driver's air bag module assembly, refer to Service Precautions and Driver's Air Bag Module and
Clock Spring [GTS] or [RALLIART] [Vehicles with WCM].
-
After the installation, perform a calibration for the ASC-ECU to learn the steering wheel sensor neutral point (Refer to On-vehicle
Service -Steering Wheel Sensor Calibration). [Vehicles with WCM and ASC]
Pre-removal & Post-installation Operation
Removal Steps 1-10 (Part 1)