Lancer Sportback L4-2.4L (4B12) (2010)
Slide the outer housing of the driver s air bag module connector in the arrow direction shown, and disconnect the connector.
]]D[[ DRIVER'S AIR BAG MODULE REMOVAL
WARNING:
-
The air bag module must not be measured with such equipment as an ohmmeter.
-
The air bag module must not be disassembled.
-
The removed air bag module should be stored in a clean, dry place with the deployment surface facing up.
Using t-type long torx wrench (T30), a torx screw is loosened completely and removed.
]]E[[ STEERING WHEEL ASSEMBLY REMOVAL
Use special tool MB990803 to remove the steering wheel.
]]F[[ CLOCK SPRING REMOVAL