Lancer Sportback L4-2.4L (4B12) (2010)
DANGER: Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
WARNING: Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.
Disconnect the negative (-) battery cable from the battery and tape the terminal to prevent accidental connection and seat belt pre-tensioner operation.
]]B[[ SEAT BELT PRE-TENSIONER CONNECTOR DISCONNECTION
Use a flat-tipped screwdriver to unlock the locking button of the floor wiring harness side connector. After releasing the lock, disconnect the connector.
]]C[[ SEAT BELT WITH PRE-TENSIONER REMOVAL
CAUTION: When discarding the seat belt with pre-tensioner, discard after operating the pre-tensioner as specified in the service procedure.
INSTALLATION SERVICE POINTS
]]A[[ PRE-INSTALLATION INSPECTION
WARNING: Dispose of seat belt pre-tensioner only according to the specified procedure.
1. When installing the new seat belt pre-tensioner, refer to "INSPECTION".
2. Connect the negative (-) battery cable.