mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Trouble Symptom Chart|Page 3845 > < Trouble Symptom Chart|Page 3843
Page 5
background image

-

Check the ground wires for open circuit.

Q: Is the wiring harness between accessory socket (front floor console) connector C-28 terminal No.1 and the ground in good condition?

YES : Go to Step 10.

NO : Repair the wiring harness.

STEP 9. Check the wiring harness between accessory socket (rear floor console) connector C-24 terminal No.1 and the ground.

-

Check the body ground wires for open circuit.

NOTE:  Check C-26 intermediate connector, and repair if necessary.

Q: Is the wiring harness between accessory socket (rear floor console) connector C-24 terminal No.1 and the ground in good condition?

YES : Go to Step 10.

NO : Repair the wiring harness.

STEP 10. Retest the system

Check if the accessory socket power is turned ON.

Q: Is the check result normal?

YES : The trouble can be an intermittent malfunction. (Refer to How to use Troubleshooting/inspection sevice points - How to cope with
Intermittent Malfunction).

NO : Replace the accessory socket.

Inspection Procedure 2

Inspection Procedure 2: The cigarette lighter does not work.[Vehicles with cigarette lighter]

CAUTION:  Before replacing the ECU, ensure that the power supply circuit, the ground circuit and the communication circuit are normal.

Trouble Symptom Chart|Page 3845 > < Trouble Symptom Chart|Page 3843