Lancer Sportback L4-2.4L (4B12) (2010)
/Page-1066012.png)
NO : Replace the steering wheel audio remote control switch.
STEP 5. Check clock spring connectors C-204 and C-205 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Are clock spring connectors C-204 and C-205 in good condition?
YES : Go to Step 6.
NO : Repair or replace the damaged component.
STEP 6. Check the clock spring.
Check whether the clock spring is in good condition (Refer to Driver's Air Bag Module and Clock Spring [EXCEPT RALLIART] See: Restraint
Systems/Air Bag Systems/Air Bag/Testing and Inspection/Driver's Air Bag Module and Clock Spring [GTS] or [RALLIART]).
Q: Is the check result normal?
YES : Go to Step 7.
NO : Replace the clock spring.
STEP 7. Check the wiring harness between steering wheel audio remote control switch connector C-202 (terminal 1) and clock spring connector
C-204 (terminal 1).
-
Check the power supply line for open circuit and short circuit.
Q: Is the wiring harness between steering wheel audio remote control switch connector C-202 (terminal 1) and clock spring connector C-204 (terminal
1) in good condition?
YES : Go to Step 8.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary.
STEP 8. Check combination meter connector C-04 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Is combination meter connector C-04 in good condition?
YES : Go to Step 9.
NO : Repair or replace the damaged component.
STEP 9. Check the wiring harness between combination meter connector C-04 (terminal 23) and clock spring connector C-205 (terminal 6).
-
Check the power supply line for open circuit and short circuit.
Q: Is the wiring harness between combination meter connector C-04 (terminal 23) and clock spring connector C-205 (terminal 6) in good condition?
YES : Go to Step 10.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary.
STEP 10. Retest the system
Check whether the illumination of the steering wheel audio remote control switch comes on normally.
Q: Is the check result normal?
YES : The trouble can be an intermittent malfunction (Refer to How to use Troubleshooting/inspection Service Points, How to Cope with
Intermittent Malfunction).
NO : Replace the steering wheel audio remote control switch.
