Lancer Sportback L4-2.4L (4B12) (2010)
/Page-1070001.png)
Steering Shaft: Removal and Replacement
STEERING COLUMN SHAFT ASSEMBLY
REMOVAL AND INSTALLATION
CAUTION
^
Before removing the steering wheel, driver's air bag module assembly and Knee Air Bag Module refer to Service Precautions, Driver's
Air Bag Module(s) and Clock Spring and Knee Air Bag Module.
^
After the installation, perform a calibration for the ASC-ECU to learn the steering wheel sensor neutral point. (Refer to On-vehicle
Service-Steering Wheel Sensor Calibration See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Steering Angle
Sensor/Service and Repair/Procedures). [Vehicles with ASC]
Pre-removal & Post-installation Operation
Removal Steps 1-10
REMOVAL SERVICE POINTS
