Lancer Sportback L4-2.4L (4B12) (2010)
/Page-1091001.png)
Suspension Strut / Shock Absorber: Removal and Replacement
Front Suspension
STRUT ASSEMBLY
REMOVAL AND INSTALLATION
CAUTION
The part indicated by * is the nut with friction coefficient stabilizer. During removal, ensure there is no damage, clean dust and soiling from
the bearing and thread surfaces, and tighten it to the specified torque.
Post-installation Operation
Removal Steps 1-6
REMOVAL SERVICE POINT
[A] STABILIZER LINK AND STRUT CONNECTION NUT REMOVAL
