Lancer Sportback L4-2.4L (4B12) (2010)
1. After setting the concentric slave cylinder to the transaxle case, tighten the flange bolt temporally.
2. Assemble the concentric slave cylinder adapter with the concentric slave cylinder.
NOTE: Fit into the groove of the transaxle case.
3. Tighten the flange bolt to the specified torque. Tightening torque: 10 ± 2 Nm (89 ± 17 in-lb)
[B] CLUTCH SET INSTALLATION
1. Apply Mitsubishi grease to the clutch disc splines and rub it into the splines with a brush.
Specified grease: Mitsubishi Part No. 0101011 or equivalent
2. Use the general service tool to position the clutch disc on the flywheel.
3. Install the clutch cover onto the flywheel.